You will need:

- Metallic spray paint

- Double stick tape

- Envelopes, of course

Step 1: Grab an envelope to use as the mask, and just put a small piece of tape at the point and at each side of the envelope underneath. Just enough to secure the mask so when sprayed, the edge stays put. You can make the edge as wide or short as you want.

Step 2: In a well-ventilated area (like outside), spray a light coating over the edge (I had rubber gloves on when I sprayed all of them). Let it dry for just 20 seconds or so.

Step 3: Then carefully peel the mask off and voila! A perfect glowing, gold edge!

When you see how beautiful it turns out, you’ll want to do it to every envelope you send.

You can see how Amanda's whole invitation suite turned out here.